Before moving your DVD/CD Player, there are certain procedures to follow which will protect your system from mechanical failure or damage due to normal physical shock which occurs during transport. If the following tips are used prior to moving, your Player should arrive safely at your destination.

1. Remember to remove all DVDs or CDs from your player before packing.

2. Make sure all DVDs or CDs are back in their cases.

3. If you don't have the owner's manual, draw a diagram of the wiring PRIOR TO disconnection. Or attach color stickers to indicate which wire goes in which jack.

4. Some players have a transport screw under the unit. Tighten before packing.

5. Remove any stacker or multi-play cartridges prior to packing, and wrap individually.

6. Close all trays.

7. The best way to move your DVD or CD player is in the original box with the original packing. In the event that you do not have the original box and/or packing, use a box big enough to cover the entire unit with enough room for packing material. The packing material should snugly fill the excess room in the box so that the unit will not move around. Plastic bubble sheets make an ideal packing material. Try to stay away from using newspaper. Seal the box with reliable packing tape. Your carrier can provide you with packing containers and materials if needed.

8. If you have a remote control, be sure to wrap it separately, but pack it in the same box with your player. All wiring should also go in the box with the player.